Furnace Replacement Cost in Shreveport: What to Expect in 2026
Service Bee-yond Compare!

If you’re pricing a new furnace in Shreveport this fall, you’ve probably noticed the quotes don’t line up. One company says $4,200, another says $8,900, and both swear they’re quoting the same job.
At SBC Cooling + Heating, our Shreveport HVAC company has been replacing heating systems across Caddo and Bossier Parishes since 2009, and that gap almost always comes down to a few specific factors.
Below is what a furnace replacement in Shreveport and beyond realistically costs in 2026, what pushes the number up or down, and what changed with tax credits this year.
Typical Furnace Prices in Shreveport for 2026
These ranges cover a typical 1,500 to 2,500 square foot home, installed, with removal of the old unit and permitting included. They assume your existing ductwork is in usable shape.
- Electric furnace (air handler with heat strips): roughly $2,500 to $5,500
- Standard-efficiency gas furnace (80% AFUE): roughly $3,800 to $6,500
- High-efficiency condensing gas furnace (95% AFUE or higher): roughly $5,500 to $9,500
- New furnace and AC installed together as a matched system: usually $10,000 and up
What Moves Your Quote Up or Down
Where the Furnace Sits in Your House
A lot of Shreveport homes have the furnace in the attic, lying on its side. Attic replacements take longer, need a secondary drain pan, and sometimes require a wider access opening or new platform. A furnace in a hall closet or garage is a quicker, cheaper swap.
Gas or Electric
Gas furnaces cost more to install because of the gas line, venting, and combustion safety checks. Electric heat costs less up front but more to run on cold nights. If your home already has gas service, staying with gas is usually the better long-term value.
Efficiency Rating
AFUE tells you how much of the fuel becomes heat. An 80% furnace wastes 20 cents of every heating dollar up the flue. A 95% furnace wastes about 5.
That sounds like an easy decision, but Shreveport winters are short. Your furnace runs far fewer hours than one in Ohio or Illinois, so the extra $2,000 or so for a condensing unit takes longer to pay for itself. For plenty of local homes, a quality 80% furnace is the smarter buy.
A federal rule set to take effect in late 2028 will require most new gas furnaces to hit 95% AFUE, which means PVC venting and a condensate drain. Replacing in 2026, you still have the choice.
Sizing and Blower Type
An oversized furnace heats in short bursts, wears out faster, and leaves cold spots. We size every new furnace installation with a Manual J load calculation, which looks at your square footage, insulation, windows, and how well the house holds heat. A 1950s house in Broadmoor loses heat very differently than a newer build off Ellerbe Road.
The blower deserves more attention here than it gets in colder states. Your furnace blower moves air for your AC all summer too. A variable-speed blower runs longer at lower speeds, which pulls more moisture out of the air during humid months. That alone can make a bigger comfort difference than the burner, especially if you’ve thought about adding a whole-home dehumidifier.
Ductwork and Add-Ons
Attic ducts in Louisiana take a beating from heat and humidity, and leaky ones waste whatever efficiency you just paid for. If your ductwork needs sealing or repair, it’s cheaper to handle it during the furnace install than as a separate visit. Common add-ons include a smart thermostat and an upgraded air filtration system that fits right into the new furnace cabinet.
Repair or Replace?
A furnace usually makes sense to replace when:
- It’s 15 or more years old and needing repairs every season
- A single repair costs more than about a third of a new unit
- A technician finds a cracked heat exchanger, which can leak carbon monoxide
- Your heating bills keep climbing even with regular maintenance
If your system is younger and has one bad part, heater repair is often the better call. We’ll tell you which way we’d go and why.
Should You Replace the AC at the Same Time?
If your outdoor AC unit is 10 to 12 years old or older, it’s worth pricing both together. The indoor coil sits on top of the furnace, so replacing them as a matched set improves efficiency and saves you a second crew visit and permit a few years from now. We can quote AC installation alongside the furnace so you can compare both options side by side.
Some homeowners go a step further with a dual-fuel setup: a heat pump handles cooling and mild-weather heating, and the gas furnace kicks in during hard freezes. It’s a good fit for our climate.
Rebates and Tax Credits in 2026
The federal 25C tax credit, which offered up to $600 on high-efficiency gas furnaces, ended for systems installed after December 31, 2025. If you’re replacing this year, it no longer applies.
Local help still exists. SWEPCO offers incentives on qualifying high-efficiency heat pumps, which can make a dual-fuel system more affordable than it looks on paper. We also offer financing for homeowners who’d rather spread the cost into monthly payments.
How to Compare Furnace Quotes
When you have quotes in hand, check that each one lists:
- A Manual J load calculation, not a size based on the old unit
- The exact model numbers for the furnace and coil
- AFUE rating and blower type (single-speed, multi-speed, or variable)
- Permit, haul-away, and any duct or venting work
- Parts and labor warranty terms, in writing
If a quote leaves you with more questions than answers, we’ll give you a free, honest second opinion.
Get a Real Number for Your Shreveport Home
Every house in Shreveport has its own layout, ductwork, and quirks, so an in-home visit is the only way to get a price you can plan around.
Contact SBC Cooling + Heating to schedule your estimate, and we’ll walk you through your options before the first cold front settles in.