Furnace Repair in Shreveport, LA
Furnace repair in Shreveport, LA from SBC Cooling + Heating gets your heat back on fast when your furnace won’t start, blows cold air, or keeps shutting off. Our licensed technicians repair gas, electric, propane, and high-efficiency furnaces of all major brands, with emergency service available when your furnace quits on a cold night.
Furnace repair is one part of our complete furnace services in Shreveport. Book online today, and we’ll find the problem and fix it right.

Our Shreveport Heating Services

Emergency Furnace Repair in Shreveport
A furnace that quits during a North Louisiana freeze can’t wait for business hours. SBC Cooling + Heating provides emergency furnace repair in Shreveport and the surrounding area, day or night, to get your heat back on and protect your home and pipes from the cold.
Our technicians arrive with stocked trucks and the tools to diagnose your furnace and make dependable repairs on the spot. Hive Comfort Club members get free priority service and never pay overtime fees. If you can safely wait a few minutes, try the quick checks below. Sometimes a tripped breaker or dead thermostat battery is all that’s wrong.
Common Furnace Problems We Repair in Shreveport
Shreveport furnaces sit idle for much of the year, then work hard during sudden cold snaps in damp air. That pattern wears out specific parts. These are the furnace repairs our technicians make most often:
- Dirty or failed flame sensors: The most common reason a furnace lights and then shuts off. Dust and humidity coat the sensor during the off-season.
- Failed hot surface ignitors: Ignitors crack with age and are a frequent cause of no-heat calls on the first cold morning of the year.
- Pilot and thermocouple problems: On older gas furnaces, a weak thermocouple or dirty pilot keeps the burners from lighting.
- Inducer motor and pressure switch failures: If the inducer motor can’t vent combustion gases or the pressure switch fails, the furnace won’t fire.
- Blower motor and capacitor failures: Worn bearings or a failed capacitor stop warm air from reaching your rooms.
- Limit switch trips: A clogged filter or blocked airflow makes the furnace overheat and shut down.
- Gas valve problems: A faulty valve can keep burners from lighting or cause uneven flames.
- Control board failures: Humidity and power surges from Louisiana storms can damage the furnace’s electronics.
- Clogged condensate drains: High-efficiency furnaces shut down when the condensate line or trap backs up.
- Cracked heat exchangers: A serious safety issue that can let carbon monoxide into your home, and it needs immediate attention.
Whatever is causing your furnace trouble, our Shreveport furnace repair technicians track down the real source of the problem instead of just treating the symptom.
What to Expect From Our Shreveport Furnace Repair Service
Every Shreveport furnace repair visit starts with a full diagnosis, so you get a lasting fix, not a guess. During your repair, your technician will:
- Ask what you’ve noticed and when the problem started
- Test the thermostat, power supply, ignition sequence, and safety controls
- Inspect the burners, flame sensor, inducer, blower, and heat exchanger
- Explain what’s wrong in plain English and give you upfront pricing before any work begins
- Make the repair with your approval, using quality parts from a stocked truck
- Run the furnace through full heating cycles to confirm it’s working properly
- Test for carbon monoxide on gas furnaces before leaving
We repair gas, electric, propane, and high-efficiency furnaces from all major brands, including Carrier, Lennox, and Trane. Most furnace repairs in Shreveport can be completed in a single visit.
Shreveport Furnace Repair FAQ
Do you offer emergency furnace repair in Shreveport?
Yes. SBC Cooling + Heating offers emergency furnace repair in Shreveport and the surrounding area, day or night. Hive Comfort Club members get priority service and never pay overtime fees.
How much does furnace repair cost in Shreveport?
It depends on the part that failed and the time the repair takes. Flame sensor cleanings and ignitor replacements are usually on the lower end, while blower motors, control boards, and gas valves cost more. You’ll always get upfront pricing before any work begins.
What should I do if my furnace won’t turn on?
Check that the thermostat is set to Heat and above room temperature, replace the thermostat batteries, check the breaker and the furnace power switch, replace a dirty filter, and make sure the furnace door panel is closed. If it still won’t start, the problem may be the ignitor, flame sensor, inducer, or control board, and it’s time to call a technician.
Why does my furnace turn on and then shut off?
A furnace that lights and then shuts off within seconds usually has a dirty or failing flame sensor. If it runs for a few minutes and then shuts down, it may be overheating from a clogged filter or blocked airflow. Both are common in Shreveport because of dust and humidity buildup.
Why is my furnace blowing cold air?
Common causes include burners that aren’t lighting, a furnace that overheats and shuts itself down, a thermostat fan set to “On” instead of “Auto,” a dirty filter, or a failed ignitor or flame sensor.
Why does my furnace short cycle?
Short cycling usually comes from overheating caused by restricted airflow, a dirty flame sensor, a thermostat that’s misreading the room, or a furnace that’s too large for the home. It wears out parts quickly and wastes energy, so it’s worth having it checked.
Why is my furnace running constantly?
A furnace that runs nonstop usually can’t reach the set temperature because of poor airflow, leaky ductwork, a thermostat problem, or a system that’s too small or wearing out. Running constantly strains the blower motor and raises your energy bills.
Can a cracked heat exchanger be repaired?
In most cases, no. A cracked heat exchanger is a serious safety risk because it can let carbon monoxide into your home. Depending on your furnace’s age and warranty, the fix is usually replacing the heat exchanger or replacing the furnace. Our technicians will walk you through both options.
Is it safe to repair my furnace myself?
Homeowners can safely check the thermostat, breaker, filter, and furnace door panel. Anything involving gas components, wiring, ignition, or venting should be handled by a licensed technician. DIY repairs can create carbon monoxide or fire risks and void your warranty.
Should I repair or replace my furnace?
Repair usually makes sense for younger furnaces and one-time problems. Replacement is worth considering if your furnace is 15 or more years old, the repair costs more than half the price of a new furnace, or you’ve needed repairs several winters in a row.
How long does a furnace repair take?
Many furnace repairs, like flame sensors, ignitors, and capacitors, are finished in an hour or two. Larger repairs such as blower motors, inducer motors, or control boards can take a few hours, or longer if a part needs to be ordered.
What should I do if my furnace smells like gas?
Leave your home right away, without turning lights or appliances on or off, and call your gas utility or 911 from outside. Once the gas company says it’s safe, contact us to inspect and repair your furnace.
Why Fast Furnace Repair in Shreveport Matters
A furnace problem rarely fixes itself, and waiting usually turns a small repair into a bigger one. Here’s why it pays to call our Shreveport furnace repair techs at the first sign of trouble:
- Small failures spread: A failing capacitor can burn out a blower motor, and a clogged filter can overheat and crack a heat exchanger.
- Safety risks grow: Venting problems, cracked heat exchangers, and gas valve issues can lead to carbon monoxide exposure.
- Efficiency drops: A furnace that short cycles or runs nonstop wastes fuel and drives up your bills.
- Cold snaps don’t wait: Repairing a problem before a freeze is much easier than an emergency call when temperatures drop into the 20s.
The sooner we can look at your furnace, the more likely the fix is quick and affordable.
Quick Checks Before You Book Furnace Repair in Shreveport
Some furnace problems have simple fixes you can safely check yourself. Before scheduling a repair, try these steps:
- Thermostat: Make sure it’s set to Heat, set above the current room temperature, and has fresh batteries.
- Breaker and furnace switch: Check your electrical panel for a tripped breaker, and make sure the light-switch-style power switch near the furnace is on.
- Air filter: A clogged filter can make the furnace overheat and shut off. Replace it if it’s dirty.
- Furnace door panel: Most furnaces won’t run unless the access panel is fully closed and seated on its safety switch.
- Gas supply: If your other gas appliances aren’t working either, contact your gas utility.
- Vents and returns: Make sure supply vents are open and return grilles aren’t blocked.
If your furnace still won’t heat after these checks, or if the problem involves gas, wiring, or anything inside the furnace, leave it to a licensed furnace repair technician.

Shreveport Furnace Repair vs. Furnace Replacement
Repair is usually the right choice for younger furnaces and one-time problems. Replacement starts to make more sense when one or more of these apply:
- Age: Gas furnaces typically last 15–20 years. If yours is 15 or older, a major repair may not be worth it.
- Cost: If a repair would cost more than about half the price of a new furnace, replacement is usually the better investment.
- The $5,000 rule: Multiply your furnace’s age by the repair cost. If the total is over $5,000, replacement often makes more sense.
- Frequent breakdowns: If you’ve needed repairs several winters in a row, more are likely on the way.
- A cracked heat exchanger: On an older furnace, this usually means replacement is the safest option.
We’ll never push a replacement when a repair will do the job reliably. When replacement is the smarter long-term choice, we’ll explain why and walk you through your options for furnace installation and replacement.
Our Shreveport Furnace Repair Process
Shreveport’s weather can turn fast after a cold front, so we keep furnace repair simple and quick:
- Scheduling: Book online, and we’ll find the soonest available time, including emergency service.
- Arrival: Your technician arrives on time and listens to what your furnace has been doing.
- Diagnosis: We inspect the ignition, burners, airflow, safety controls, and anything tied to your symptoms.
- Clear pricing: You get a plain-English explanation and upfront pricing before any work begins.
- Repair and testing: We make the repair, run the furnace through full heating cycles, and test for carbon monoxide.
- Prevention tips: We’ll share tips to help keep the problem from coming back and let you know when your next furnace tune-up is due.
From start to finish, our goal is to get your furnace repaired correctly the first time.
Shreveport Furnace Repair Costs & Financing
The cost of furnace repair in Shreveport depends on which part failed and how long the repair takes. Flame sensor cleanings and ignitor replacements cost far less than a blower motor, control board, or gas valve. You’ll always get upfront pricing before any work begins. These options help make repairs easier on your budget:
- Hive Comfort Club: Members get a discounted diagnostic fee, 15% off repairs, a repair price guarantee, and no overtime fees. Learn more about the Hive Comfort Club.
- Flexible financing: Larger repairs can be financed through Optimus, with a soft credit pull that won’t affect your credit score.
- Free second opinions: Already have a repair quote? We’ll give you an honest second opinion at no charge.
We’ll always help you find the most cost-effective way to get your heat back on.
Why Choose SBC Cooling + Heating for Furnace Repair in Shreveport
Since 2009, SBC Cooling + Heating has been the team Shreveport homeowners call when their furnace breaks down. We’re licensed under Louisiana HVAC License #55256 and repair furnaces across Caddo and Bossier Parishes from our offices on West 67th Street in Shreveport and Sligo Road in Haughton, including emergency service when the heat goes out.
Our technicians all pass background checks and drug screenings, and they arrive with stocked trucks so most repairs are finished in one visit. Every furnace repair in Shreveport is backed by our satisfaction guarantee and upfront pricing.
Furnace Repair Near You in Shreveport
SBC Cooling + Heating provides furnace repair throughout Shreveport from our office at 505 W 67th St. We regularly repair furnaces in neighborhoods including:
- Highland, Fairfield & South Highlands: older homes where pilot assemblies, thermocouples, and gas valves on aging furnaces are common repairs
- Broadmoor & Shreve Island: established homes with attic furnaces where dust buildup leads to flame sensor and limit switch problems
- East Shreveport & North Highland: mid-century ranch homes with older furnaces prone to ignitor and blower motor failures
- Southern Hills & Sunset Acres: south Shreveport neighborhoods close to our West 67th Street office for fast response times
- Ellerbe Woods & Spring Lake: newer homes with high-efficiency furnaces where condensate clogs and pressure switch issues are frequent fixes
- Cross Lake & Western Hills: lakeside homes where humidity speeds up corrosion on control boards and electrical connections
Wherever your furnace breaks down in Shreveport, our technicians are close by and ready to help.
Why Choose Us for Your Shreveport Furnace Needs
SBC Cooling + Heating has spent over 15 years working with the kind of winter swings Shreveport is known for, and we’ve learned exactly what it takes to keep a home warm when the temperature drops fast. Here’s why homeowners rely on us to keep their heat steady:
We’re committed to serving our neighbors with honest, transparent service you can trust.
We offer fast, reliable service to get your heat back on and your home up and running.
A certified team of pros who take pride in getting the job done right the first time.
We offer customized repairs, replacement, installations, maintenance, and anything else you need.
Honest, transparent pricing without any surprises.
Flexible options to make your repairs as easy as possible on your budget.

Get Your Shreveport Furnace Fixed Today
A struggling furnace isn’t something to wait out. Book your furnace repair in Shreveport online today, and SBC Cooling + Heating will diagnose the problem, make a repair that lasts, and get your home warm again.